XENON headlights trainer

XENON headlights trainer

The equipment incorporates a system of bi-xenon headlights assembled with their electrical installation, sensors, actuators and vehicle controls.

MORE INFORMATION

Are you interested in
this product?

Do not hesitate and contact us. Click on the button and ask for more information. We will answer you as soon as possible.
MORE INFORMATION

Description

Ref.: 9EQXENON6C – 230 V
Ref.: 9EQXENON3C – 115 V

The equipment incorporates a system of bi-xenon headlights assembled with their electrical installation, sensors, actuators and vehicle controls.

To illuminate the full headlights, use the xenon lamp accompanied by a halogen lamp and for dipped headlights only use the xenon lamp as its luminosity is limited by means of a diaphragm in order not dazzle other drivers.

Automatic checking for the height of the lights is used to maintain the lights well adjusted when the bodywork ilts. This adjustment is done using an electrical motor which is controlled by the UCE, based on the bodywork position information, which is transmitted by the front and rear sensors.

The trainer is equipped with all the components and accessories which are necessary for correct operation in conditions which are similar to that of a vehicle.

Didactic application

The learning model is based on developing activities with real vehicle components, available in a didactic medium to ease the student’s learning process, so that:

  • It has real application, integrating effectively all the target contents for learning about lighting.
  • It helps to signifi cantly reduce learning time in the procedure-related activities thanks to the easy accessibility of the components and
    checking points. Furthermore it maintains the characteristics of the equipment assembled on the vehicle.
  • It is motivating for the student.
  • It is motivational for the students.

Didactic characteristics

The student uses this equipment to develop the following skills:

  1. Analysis of the operating principle for xenon headlights.
  2. Interpretation of diagrams.
  3. Circuit analysis.
  4. Identifying and locating components.
  5. Checking and analysing components.
  6. Handling and interpreting technical documentation.
  7. Handling instrumentation for checking and diagnosis.
  8. Diagnosis and repair of faults.

There is a system designed by Alecop, integrated into the control panel, which makes it possible to measure the signals of all the components within the lighting system, the analysis, diagnosis and repair of faults including:

  • Terminal plate for analysis and diagnosis of all the signals in the system.
  • Module to generate dysfunctions or faults which are similar to what can really be produced in vehicles.
  • Operation authorisation and equipment use switch.
  • Indicators for correct battery operation, safety alarm, etc.
  • Start up key, battery ON-OFF switch, light panel and instrument panel simulator.
  • Shaft sensors, for the system which automatically regulates the height of the headlights with vehicle simulation.

automocion_entrenador_faros_xenon_b

automocion_entrenador_faros_xenon_c

Teaching support

User manual

This incorporates the total description of the equipment containing the features,usage standards, installation and set up, maintenance, safety measures, wiring diagrams, list of fault generation and their symptoms, etc.

Manual of practical activities

This is a manual which proposes the different types of practical which can be done with the trainer with the correct answer or solution for the activities to make the teacher’s job easier. Individual identifi cation of components, identifi cation of systems, checking sensors and actuators, checking signals, reproduction and identifi cation of fault symptoms, looking for and locating faults, diagnosis code reading, proposal to resolve defects, virtual repairs, etc.

Technical specifications

  • Complete bi-xenon light.
  • Ignition amplifier.
  • Electronic ballast.
  • Actuator motor to adjust the height of the focus.
  • Front module sensor.
  • Rear sensor.
  • Headlight cleaner simulator.
  • Light control box.
  • Ignition key.
  • Potentiometer to simulate the vehicle speed.
  • Diagnosis connector which is standard EOBD (EOBDII).
  • Relays and fuses used in the system.
  • Module to generate faults.
  • RS-232C series line connector.
  • Safety systems made up of:
  • Operation permission press button.
  • Safety micro-switch for access to headlight components.
  • Checking terminal protection.
  • Equipment dimensions: 900 x 555 x 355 mm.
  • Approx. weight: 16 Kg.
Breakdowns

The equipment has the possibility of introducing dysfunctions or faults in its operation by means of a programming- repair system.
There are two options:

  • Manual fault repair system (using switches).
  • Intelligent system for virtual computer aided fault repair (SIRVAUT), which by using interactive software allows not only analysis of the fault but also virtual repair of the fault generating a report to be evaluated by the teacher.

NEW CAR COMPONENTS

Bi-xenon headlight

automocion_entrenador_faros_xenon_d

Front sensor with integrated module and rear sensor.

automocion_entrenador_faros_xenon_e

Relays, fuses, RS-232C and EOBD II connectors.

automocion_entrenador_faros_xenon_f

SIRVAUT Software integrated into the equipment.

automocion_entrenador_faros_xenon_g

Download .PDF Catalogue

Download Catalogue

Click here to download the PDF catalogue for the equipment of this area.
Download .PDF Catalogue

Si continuas utilizando este sitio aceptas el uso de cookies. más información

Los ajustes de cookies de esta web están configurados para "permitir cookies" y así ofrecerte la mejor experiencia de navegación posible. Si sigues utilizando esta web sin cambiar tus ajustes de cookies o haces clic en "Aceptar" estarás dando tu consentimiento a esto.

Cerrar