Bench
Independent bench for testing rotating electrical machines
Are you interested
in this product?
Description
Ref.: 9EQBNC199A
Lets you set the machine under test conditions easily in the test bench, under safety standards that prevent the incorrect operation of the bench.
The control of the bench is carried out by potentiometric dials with variable torque or speed, or by external signals that allow SAD and computer control.
Power, speed and torque exerted on the shaft of the bench, signals available on the external connector can be seen at all times
In the face of any malfunction on the bench (high or insufficient voltage, excessive torque applied, high speed, etc) the protection activated is indicated by the display.
The bench absorbs energy from the single phase power supply when operating as a traction motor and returns power to the grid when operating as a brake.
Technical specifications
| GENERAL |
|---|
| Dimensions: 950 x 360 x 420 mm |
| Weight: 41 Kg |
| Power supply: Single phase network 190 to 250Vac- 5,25 Amp.- 50/60Hz |
| Machines type to be tested:
– Foot height typeTipo pie de altura 71, 80 and 90 mm. – 80 and 90 mm height on Alecop profiles. |
| The testing machine is attached using elastic coupling |
| PROTECTIONS |
|---|
| Mobile protection with electric anchor. |
| Emergency stop button on the bench. |
| 4mm safety terminals for the connection of the machine under testing. |
| Internal protections: internal temperature, torque, speed, insufficient voltage, excessive over voltage and grid overcurrent |
| OPERATING AS A TRACTION MOTOR |
|---|
| Speed: 0 to 2000 rpm |
| Rated: 800 w |
| Maximum torque: 9,7 Nm |
|
OPERATING AS A BRAKE
|
|---|
|
Maximum speed: 2450 rpm
|
|
Torque: 0 to 10 Nm
|
|
Rated: 800 w
|