Armoni
PC-controlled CNC machining centre for technical training
Are you interested
in this product?
Description
This is a vertical milling machine controlled by PC ARMONI , an industrial concept adapted to education. Because safety is a major factor, with this product we offer an extremely safe solution adapted to the needs of the learning process. The optional incorporation of appropriate accessories converts this equipment into a complete machining center, that could be a part of a flexible system.
Multi CNC
Programming and visualization of FAGOR, SIEMENS and FANUC simulators.
Technical characteristics
Longitudinal X travel | 200 mm |
Transversal Y travel | 200 mm |
Vertical Z travel | 200 mm |
Measurements of the work table | 450 x 180 mm |
Maximum spindle-table distance | 320 mm |
Spindle motor | Three-phase asynchronous 1,5 Kw |
Spindle taper | ISO 30 |
Spindle motor rotation speed | 100-4000 rpm |
Axes advance motors | Step 200 ppv |
Maximum advance of axes | 2500 mm/min |
Electronic resolution | 0,0025 mm |
Door opening | Automatic |
Supply voltage | 220 V 50/60 Hz |
Dimensions of machine | 970 x 750 x 900 mm |
Approximate weight | 310 Kg |

Optional accessories
- 8 position tool changer.
- Parts securing device. (Manual jaws, corrected or pneumatic jaws).
- ISO-30 tool holder cones. Clamps and cutters.
- Support table for the machine and the PC.
- Cooling system.
- Silent compressor.
- Winunisoft editing and simulation software.
Standard configuration
- Vertical milling machine with built-in safety devices.
- Set of user and programming manuals.
- Control software for PC.
WinUnisoft+ multicontrol -CNC PC control software
This software operates the machine with realistic control emulators FAGOR-FANUC-SIEMENS
A license of WinUnisoft+ is already included with each machine.
This software allows to simulate and execute the machining of a CNC program, ISO code edited or defined by CAD/CAM system, analysing possible errors.
Apart from its performance, the excellent graphic quality of the 3D simulator, makes a fast comprenhension possible of the performed machining operations.
The main features of the programme are:
- Control of machine drives
- Assited graphic programming for all ISO functions supported by the chosen control emulator.
- Simulation of different tool geometries.
- 3D simulaton views of the workpiece, tool, and paths.
- Program operation in automatic or block to block mode.
- Collision detection of the tool with the workpiece and the jaw chuck.
- Report generation.