Electrical machines, charges and braking system
All the electrical machines are mounted on an aluminium bedplate, with their corresponding end connections for quick, easy coupling to other machines, brakes or tacho dynamos. They also include a printed terminal block with safety terminals and protection guards on the shafts.
DC training motor AL-506 / AL-1006
Model AL-506 is an independent excitation motor. Model AL-1006 is an excitation and compound machine
| CHARACTERISTICS | AL-506 | AL-1006 |
|---|---|---|
| Reference | 9MAK0906ZC | 9MAK1006ZC |
| Power | 370W | 370W |
| Supply Voltage | 220V | 220V |
| Maximum Speed | 2500rpm | 2500rpm |
| Axis height | 80 | 80 |
Asynchronous training motor AL-1106
Single-speed three-phase asynchronous squirrel-cage motor.
|
CHARACTERISTICS
|
AL-1106 |
|---|---|
| Reference | 9MAK1106GC |
| Power | 400W |
| Supply Voltage | 230/400V |
| Maximum Speed | 1420rpm |
| Axis height | 80 |
|
CHARACTERISTICS
|
AL-1106 |
|---|---|
| Reference | 9MAK1106HC |
| Power | 400W |
| Supply voltage | 230/400V |
| Maximum speed | 1690rpm |
| Axis height | 80 |
Didactic tachodynamo REO-444
|
CHARACTERISTICS
|
REO-444-80 | REO-444-90 |
|---|---|---|
| Reference | 9EQDINTQ80 | 9EQDINTQ90 |
| Constant | 60 V/1000 r.p.m. | 60 V/1000 r.p.m. |
| Maximum Speed | 1000 r.p.m. | 1000 r.p.m. |
| Axis height | 80 mm | 80 mm |
Braking system – Bank
Lets you set the machine easily into the bed, under safety standards that prevent the operation of the bank improperly.
The control of the bed is made by potentiometric dials variable torque or speed, or by external signals that allow for SAD and control by computer.
Viewing every moment of the power, speed and torque exerted on the shaft of the bench, signals available on external connector.
 |
|
|
OPERATING AS MOTOR DRIVE
|
|
|---|---|
| Speed | 0 a 2000 rpm |
|
Rated
|
800 w |
| Maximum torque | 9,7 Nm |
TECHNICAL SPECIFICATIONS
|
GENERIC
|
|
|---|---|
| Supply | Red monofásica 190 a 250Vac- 5,25 Amp.- 50/60Hz |
|
Type machines to be tested
|
– Tipo pie de altura 71, 80 y 90 mm. – Altura 80 y 90 mm sobre perfiles Alecop.
|
| Securing the machine under test by coupling | |
|
WORKS AS A BRAKE
|
|
|---|---|
| Maximum Speed | 2450 rpm |
|
Par
|
0 to 10 Nm |
| Rated | 800 w |
System TP-200 rolling loads
Transportable loads unit which disposes of a 100 Ohm./1000W rheostat, six 72 Ohm./200W resistances independent from each other (series, parallel or mixed connection), three inductances of 30mH./5 A and a condenser of 25 μF./450 V.
| Ref: 9EQCATP200 |